Kingston ValueRam 8GB 3200Mhz DDR4 SODIMM for Laptop KVR32S22S8/8

KVR32S22S8/8 8GB 1Rx8 1G x 64-Bit PC4-3200 CL22 260-Pin SODIMM

DESCRIPTION This document describes ValueRAM's KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES •   Power Supply: VDD = 1.2V Typical •   VDDQ = 1.2V Typical •   VPP = 2.5V Typical •   VDDSPD = 2.2V to 3.6V •   Nominal and dynamic on-die termination (ODT) for    data, strobe, and mask signals •   Low-power auto self refresh (LPASR) •   Data bus inversion (DBI) for data bus •   On-die VREFDQ generation and calibration •   Single-rank •   On-board I2 serial presence-detect (SPD) EEPROM •   16 internal banks; 4 groups of 4 banks each •   Fixed burst chop (BC) of 4 and burst length (BL) of 8    via the mode register set (MRS) •   Selectable BC4 or BL8 on-the-fly (OTF) •   Fly-by topology •   Terminated control command and address bus •   PCB:  Height 1.18” (30.00mm) •   RoHS Compliant and Halogen-Free

SPECIFICATIONS CL(IDD) Row Cycle Time (tRCmin) Refresh to Active/Refresh Command Time (tRFCmin) Row Active Time (tRASmin) UL Rating Operating Temperature Storage Temperature 22 cycles 45.75ns(min.) 350ns(min.) 32ns(min.) 94 V - 0 0o C to +85o C-55o C to +100o C